Anthracite base in large

This base is intended for our birdhouses and waterers if you do not have the opportunity to put them in the ground or in a larger flower pot.

With its footprint of 40 x 40 cm, this stand is significantly larger than our smaller version. We recommend this for our larger birdhouses and waterers, especially if they are exposed to strong winds.

Except for the size, it has the same characteristics.

Since this makes the birdhouse higher (it is not 15-20 cm in the ground), we can shorten the birdhouse pole to your desired size for you. Simply enter the desired height (total height or measured from the floor to the bottom edge of the birdhouse) in the message field at the end of the ordering process.

• grey painted concrete stand for a secure stand for our bird houses

• with stainless steel sleeve for screwing onto the base

• Dimensions: approx. 40 x 40 x 4.5 cm, shipping weight approx. 18 kg

• Scope of delivery: concrete base, stainless steel sleeve with Allen screw

• Rod is not part of the base and must be ordered separately if required

Assembly

An enclosed stainless steel sleeve is screwed onto the concrete base and the birdhouse is then inserted. Use the Allen key from the birdhouse assembly set to lightly tighten the side Allen screw of the sleeve. If your rod has a hole in the side at the bottom, simply ignore it. The Allen screw cannot (and should not) reach into this hole.

We would also be happy to shorten the rod to your desired size. Simply indicate the desired total height in the message field at the end of the ordering process. (Since the birdhouse is not 15-20cm into the ground, it is otherwise correspondingly higher).