Stand for bird feeder - grey

This base is intended for our birdhouses and waterers if you do not have the opportunity to put them in the ground or in a larger flower pot.

Since the birdhouse is not 15-20cm into the ground and due to the thickness of the base of approx. 4.5cm, the feeding place is correspondingly higher.

We would also be happy to shorten the rod to your desired size. Simply indicate the desired total height in the message field at the end of the ordering process.

• grey painted concrete stand for a secure stand for our bird houses

• with stainless steel sleeve for screwing onto the base

• Dimensions: approx. 30 x 30 x 4.5 cm, shipping weight approx. 11 kg

• Scope of delivery: concrete base, stainless steel sleeve with Allen screw

• Rod is not part of the base and must be ordered separately if required

This base is intended for our birdhouses and waterers if you do not have the opportunity to put them in the ground or in a larger flower pot.

Assembly

An enclosed stainless steel sleeve is screwed onto the concrete base and the birdhouse is then inserted. Use the Allen key from the birdhouse assembly set to lightly tighten the side Allen screw of the sleeve. If your rod has a hole in the side at the bottom, simply ignore it. The Allen screw cannot (and should not) reach into this hole.

We would also be happy to shorten the rod to your desired size. Simply indicate the desired total height in the message field at the end of the ordering process. (Since the birdhouse is not 15-20cm into the ground, it is otherwise correspondingly higher).